Accuracy Electronics Technologies Co.,Ltd
Fine Service Low Costing High Quality On-Time Delivery
Add to Cart
FR4 Material LED Light PCB Board Excellent Heat Dissipation for LED Driver
Production description :
this board is 2 layer it is used on LED light. PCB prototype,samll volum, middle and large volume are accepted. no MOQ request for new order.all of our PCB are met UL, TS 16949,ROHS, ISO etc. certification.
PCB Flow Chart.pdf
Key Specifications/Special Features:
| Base material : | FR4 |
| Copper thickness : | 1.5 oz |
| Board thickness : | 1.0 mm |
| Min. hole size : | 0. 4mm |
| Min. line width : | 10 mils |
| Min. line spacing : | 10 mils |
| Surface finishing : | ENIG |
| Application : | LED lCeiling light |
| Board thickness tolerance : | ±10% |
| Twist& wrap : | ≤ 0.5% |
| Max panel size: | 400X800mm |
| Aspect ratio: | max 10:1 |
| Nickel plating thickness: | 150u''-200u'' |
| outline profile: | punching, routing, v-cuting |
| outline tolerance: | +/-10% |
| twist and bow: | no more than 0.75% |
| impedance control: | +/-10% |
ACCPCB Technical Capability.pdf
Products Application:
1, Security monitor: Moible phone, PDA, GPS, caramer monitor etc;
2, Telecom Communication :wireless LAN card, XDSL router,Servers, Optical Device,Hard Drive etc;
3, Consumer Electronics: TV, DVD,Digital Caramer, air conditoner, Refrigerator,set-top box etc;
4, Vehicle Electronices: Car etc;
5, Industrial controls: Medical device ,UPS equipment, Control device etc;
6, Military & Defense : Military Weapons etc;
FAQ:
1. 1. How do ACCPCB ensure quality?
Our high quality standard is achieved with the following.
1. 1 The process is strictly controlled under ISO 9001:2008 standards.
1. 2 Extensive use of software in managing the production process
1. 3 State-of-art testing equipments and tools. E.g. Flying Probe,e-Testing, X-ray Inspection, AOI (Automated Optical Inspector) .
1. 4.Dedicated quality assurance team with failure case analysis process
2. 2. What kinds of boards can ACCPCB process?
Common FR4, high-TG and halogen-free boards, Rogers, Arlon, Telfon, aluminum/copper-based boards, PI, etc.
3. 3.What data are needed for PCB production?
PCB Gerber files with RS-274-X format.
4. What’s the typical process flow for multi-layer PCB?
Material cutting → Inner dry film → inner etching → Inner AOI → Multi-bond→ Layer stack up Pressing → Drilling → PTH → Panel Plating → Outer Dry Film → Pattern Plating → Outer etching → Outer AOI → Solder Mask → Component Mark → Surface finish → Routing → E/T → Visual Inspection.
5. 5. How many types of surface finish ACCPCB can do?
the leader has the full series of surface finish, such as: ENIG, OSP, LF-HASL, gold plating (soft/hard), immersion silver, Tin, silver plating, immersion tin plating, carbon ink and etc. .. OSP, ENIG, OSP + ENIG commonly used on the HDI, we usually recommend that you use a client or OSP OSP + ENIG if BGA PAD size less than 0.3 mm.
6.
Application:
Widely used in stage, Industrila control,computer,consuming electronics,security,automotive,power electronics,medical,telecom etc.
Any further question, welcome to contact us by sending your inquiries