Accuracy Electronics Technologies Co.,Ltd
Fine Service Low Costing High Quality On-Time Delivery
Add to Cart
OEM Cistomized HDI PCB Board ENIG Surface Finish 6 Layer 2 Step ITEQ FR4 TG150
Key Specifications/Special Features:
| Layer : | 6 Layers |
| Base Material : | ITEQFR4 TG150 |
| Copper Thickness : | 0.5oz inner layer / 1oz outlayer |
| Board Thickness : | 0.80mm |
| Min. Hole Size : | 6 mil / 0.15mm |
| Solder mask : | White |
| Min. Line Width : | 5mil |
| Min. Line Spacing : | 5milMin |
| Clearance of Hole to Line : | 0.2mm |
| Origin : | Shenzhen, China |
ACCPCB Technical Capability.pdf
Lead Time:
| Types |
(Max ㎡/month) | Samples (days) | Mass Production(days) | ||
| New PO | Repeat PO | Urgent | |||
| 2layer | 50000 sq.m/month | 2-3 | 10-11 | 8-9 | 4 |
| 4layer | 5-6 | 11-12 | 9-11 | 5 | |
| 6layer | 6-7 | 13-14 | 12-14 | 6 | |
| 8layer | 7-8 | 16-18 | 14-15 | 7 | |
Advantages :
• Strict product liability, taking IPC-A-160 standard
• Engineering pretreatment before production
• Production process control (5Ms)
• 100% E-test, 100% visual inspection, including IQC, IPQC, FQC, OQC
• 100% AOI inspection, including X-ray, 3D microscope and ICT
• High-voltage test, impedance control test
• Micro section, soldering capacity, thermal stress test, shocking test
• In-house PCB production
• No minimum order quantity and free sample
• Focus on low to medium volume production
• Quick and on-time delivery
FAQ:
1. What kinds of boards can ACCPCB process?
Common FR4, high-TG and halogen-free boards, Rogers, Arlon, Telfon, aluminum/copper-based boards, PI, etc.
2. What data are needed for PCB production?
PCB Gerber files with RS-274-X format.
3. What’s the typical process flow for multi-layer PCB?
Material cutting → Inner dry film → inner etching → Inner AOI → Multi-bond→ Layer stack up Pressing → Drilling → PTH → Panel Plating → Outer Dry Film → Pattern Plating → Outer etching → Outer AOI → Solder Mask → Component Mark → Surface finish → Routing → E/T → Visual Inspection.
4. How many types of surface finish ACCPCB can do?
the leader has the full series of surface finish, such as: ENIG, OSP, LF-HASL, gold plating (soft/hard), immersion silver, Tin, silver plating, immersion tin plating, carbon ink and etc. .. OSP, ENIG, OSP + ENIG commonly used on the HDI, we usually recommend that you use a client or OSP OSP + ENIG if BGA PAD size less than 0.3 mm.
5. How do ACCPCB ensure quality?
Our high quality standard is achieved with the following.
1.1 The process is strictly controlled under ISO 9001:2008 standards.
1.2 Extensive use of software in managing the production process
1.3 State-of-art testing equipments and tools. E.g. Flying Probe,e-Testing, X-ray Inspection, AOI (Automated Optical Inspector) .
1.4.Dedicated quality assurance team with failure case analysis process
